Search

Rotary Single Pro

Suggested price from:
239
More info

Product info

The Rotary is a real street/dirt mountain bike disc brake SS hub (135/10) using pure BMX technology. Say no to the heavy hubs taken straight from BMX catalogues with tiny & weak driver bearings & weak 3/8"-10mm axles. The Rotary hub is so light because we decided to shave any unnecessary weight to the limit without sacrificing the strength at all.

 

Instead of a long and weak 3/8” axle we used a bigger diameter AL7075-T6 axle & steel hardware on the drive side to make it almost indestructible. Aluminium axle was slightly redesigned to make it stronger than before, allowing perfect hub rolling long-life, no slowing down even overtightened. No more adjusting, no more unscrewing or stripped cone nuts - they are slip-on. No external threads to damage. Hollow 3/8” bolts with 17mm hex heads & 8mm Allen hex sockets will fully immobilise your wheel in the dropouts. The driver runs on a bushing eliminating the need to use tiny and week bearings. It’s strong as hell and run smooth.

 

Starting from 2013 Rotary Single Pro features an upgraded driver with separate springs for each pawl: 4 pawls, 4 springs. Engagement is really good – this hub won’t skip. Please also note that we added one special feature you were asking for - this hub is really loud!

NEW FOR 2017:

9T driver instead of 10T.

Technical specification

Material: AL6061-T6 body, AL7075-T6 axle & left cone, steel drive side hardware & bolts

O.L.D: 135mm

Compatible with: all MTB frames (O.L.D 135 x 10mm or 3/8”)

Female oversize: female oversize axle system + side bolts this solution rules as it’s light & strong!

Hollow: AL7075-T6 axle

Sealed bearings: 2x #6902 sealed bearings (main hub bearings) & special light & strong bushing system inside driver

Bolts: hollow, 17mm hex head and 8mm Allen hex sockets, 3/8”x24tpi thread

Bushing: 9T driver using bushing

Pawls: 4 pawls & 4 springs, with 24 engagement points / each 15°

Brake side: slip-on cones, nothing to be adjusted, steel on drive side and aluminium on disc brake side

Disc brake: mount IS (International Standard / 6-bolts)

Available: in 32h version only

Weight: ~395g

Specifications subject to change without notice. Actual colours and design may vary slightly from the images on the website.

BuyMultimediaWheelbuilding info

Newsletter