Our RNS and Fundamental forks are a common sight in loads of trick-track bikes, so we decided to take these products one step further and make a fork specifically designed for fixed gear trick bikes. You will get a lower axle-to-crown height than normally found on MTB forks to keep your steering sharp, but at the same time you will still be able to barspin with this fork on the Analog frame.

The fork features tasty, classic round blades, an strong dropout interface and a sweet cut-out on the bottom of the steer tube.

Even though the fork is built to withstand serious abuse, the weight remains nice - we used all our knowledge from the dirt jumping fork line when building the Analog. You get triple butted legs, multi butted 1pcs CNC steer tube and our full heat treatment process after welding. The Analog fork was tested not only by fixed gear riders. We gave few forks to our park & street riders to confirm it’s strong enough.

The Analog fork comes with functional compression device - this 7075 alloy top cup will still work w/o any modification even after you cut your steer tube. The top cup looks really clean and features 8mm & 6mm Allen hex sockets. 

• ● material: heat treated 4130 cromoly
• ● double butted and tapered legs
• ● height a-c: 410 mm / 16.1”
• ● rake: 26 mm / 1”
• ● steer tube length: 205mm / 8”
• ● steer tube can be cut down by ~28mm / 1.1” without damaging the threads
• ● 7075  threaded top cup with 6mm and 8mm Allen hex sockets, M24x1.5” thread
• ● top cup can be cut down in the middle without damaging threads
• ● dropouts 5mm thick
• ● safety washer interface
• ● no brake mounts
• ● weight: ~1.1kg + 0.03 kg alloy 7075 compression top cup
  
• ● colours: black, lemon lime